Our Publications

Refereed Journal Publications

  1. A. Keshavarzkermani, R. Esmaeilizadeh, P. Enrique, H. Asgari, N. Zhou, A. Bonakdar, E. Toyserkani
    Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion
    Materials Characterization, 2021
  2. H. Fayazfar, I. Rishmawi, M. Vlasea
    Electrochemical-Based Surface Enhancement of Additively Manufactured Ti-6Al-4V Complex Structures
    Journal of Materials Engineering and Performance, 2021
  3. L. Brock, I. Ogunsanya, H. Asgari, S. Patel, M. Vlasea
    Relative Performance of Additively Manufactured and Cast Aluminum Alloys
    Journal of Materials Engineering and Performance, 2021
  4. Z. Zhang, O. Ibhadode, U. Ali, F. Dibia, P. Rahnama, A. Bonakdar, E. Toyserkani
    Topology optimization parallel-computing framework based on the inherent strain method for support structure design in laser powder-bed fusion additive manufacturing
    International Journal of Mechanics and Materials in Design , 2020
  5. E. Wheat, G. Shanbhag, M. Vlasea
    The master sinter curve and its application to binder jetting additive manufacturing
    Journal of Manufacturing Science and Engineering, 2020
  6. B. Marzbanrad, E. Toyserkani, H. Jahed
    Customization of residual stress induced in cold spray printing
    Journal of Materials Processing Technology, 2020
  7. E. Davoodi, H. Montazerian, A. Khademhosseini, E. Toyserkani
    Sacrificial 3D Printing of Shrinkable Silicone Elastomers for Enhanced Feature Resolution in Flexible Tissue Scaffolds
    Acta Biomaterialia, 2020
  8. T. Minasyana, S. Aydinyana, L. Liu, O. Volubujeva, E. Toyserkani, I. Hussainova
    Mo(Si1-x,Alx)2-based composite by reactive laser powder-bed fusion
    Materials Letters, 2020
  9. G. Shanbhag, M. Vlasea
    The effect of reuse cycles on Ti-6Al-4V powder properties processed by electron beam powder bed fusion
    Manufacturing Letters, 2020
  10. M. Naiel, D. Ertay, M. Vlasea, P. Fieguth
    Adaptive Vision-based Detection of Laser-Material Interaction for Directed Energy Deposition
    Additive Manufacturing, 2020
  11. P. Enrique, A. Keshavarzkermani, R. Esmaeilizadeh, S. Peterkin, H. Jahed, E. Toyserkani, N. Zhou
    Enhancing Fatigue Life of Additive Manufactured Parts with Electrospark Deposition Post-processing
    Additive Manufacturing, 2020
  12. H. Fayazfar, F. Liravi, U. Ali, E. Toyserkani
    Additive manufacturing of high loading concentration zirconia using high-speed drop-on-demand material jetting
    The International Journal of Advanced Manufacturing Technology, 2020
  13. S. Patel, A. Rogalsky, M. Vlasea
    Towards understanding side-skin surface characteristics in laser powder bed fusion
    Journal of Materials Research, 2020
  14. P. Kumar, Y. Huang, E. Toyserkani, M. Khamesee
    Development of a Magnetic Levitation System for Additive Manufacturing: Simulation Analyses
    IEEE Transactions on Magnetics, 2020
  15. E. Davoodi, E. Sarikhani, H. Montazerian, S. Ahadian, M. Costantini, W. Swieszkowski, S. Willerth, M. Mofidifar, E. Toyserkani, A. Khademhosseini, N. Ashammakhi
    Extrusion and Microfluidic?Based Bioprinting to Fabricate Biomimetic Tissues and Organs
    Advanced Materials Technologies, 2020
  16. E. Jabari, F. Liravi, E. Davoodi, L. Lin, E. Toyserkani
    High Speed Three-Dimensional Material-Jetting Additive Manufacturing of Viscous Graphene-based Ink with High Electrical Conductivity
    Additive Manufacturing, 2020
  17. S. Ertay, M. Vlasea, K. Erkorkmaz
    Thermomechanical and geometry model for directed energy deposition with 2D/3D toolpaths
    Additive Manufacturing, 2020
  18. O. Ibhadode, Z. Zhang, P. Rahnama, A. Bonakdar, E. Toyserkani
    Topology optimization of structures under design-dependent pressure loads by a boundary identification-load evolution (BILE) model
    Structural and Multidisciplinary Optimization, 2020
  19. M. Ansari, A. Martinez-Marchese, Y. Huang, E. Toyserkani
    A mathematical model of laser directed energy deposition for process mapping and geometry prediction of Ti-5553 single-tracks
    Materialia, 2020
  20. U. Ali, H. Fayazfar, F. Ahmed, E. Toyserkani
    Internal surface roughness enhancement of parts made by laser powder-bed fusion additive manufacturing
    Vacuum, 2020
  21. R. Esmaeilizadeh, A. Keshavarzkermani, U. Ali, B. Behravesh, A. Bonakdar, H. Jahed, E. Toyserkani
    On the Effect of Laser Powder-Bed Fusion Process Parameters on Quasi-Static and Fatigue Behaviour of Hastelloy X: A Microstructure/Defect Interaction Study
    Additive Manufacturing, 2020
  22. A. Rogalsky, I. Rishmawi, L. Brock, M. Vlasea
    Low cost irregular feed stock for laser powder bed fusion
    Journal of Manufacturing Processes, 2018
  23. M. Vlasea, E. Toyserkani, R. Pilliar
    Effect of gray scale binder levels on additive manufacturing of porous scaffolds with heterogeneous properties
    International Journal of Applied Ceramic Technology, 2015
  24. P. Enrique, E. Marzbanrad, Y. Mahmoodkhani, A. Keshavarzkermani, H. Momani, E. Toyserkani, N. Zhou
    Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites
    Journal of Materials Science & Technology, 2020
  25. S. Patel, M. Vlasea
    Melting modes in laser powder bed fusion
    Materialia, 2020
  26. S. Shahabad, Z. Zhang, A. Keshavarzkermani, U. Ali, Y. Mahmoodkhani, R. Esmaeilizadeh, A. Bonakdar, E. Toyserkani
    Heat source model calibration for thermal analysis of laser powder-bed fusion
    The International Journal of Advanced Manufacturing Technology, 2020
  27. E. Davoodi, H. Montazerian, R. Haghniaz, A. Rashidi, S. Ahadian, A. Sheikhi, J. Chen, A. Khademhosseini, A. Milani, M. Hoorfar, E. Toyserkani
    3D-Printed Ultra-Robust Surface-Doped Porous Silicone Sensors for Wearable Biomonitoring
    ACS Nano, 2020
  28. E. Davoodi, H. Fayazfar, F. Liravi, E. Jabari, E. Toyserkani
    Drop-on-Demand High-Speed 3D Printing of Flexible Milled Carbon Fiber/Silicone Composite Sensors for Wearable Biomonitoring Devices
    Additive Manufacturing, 2020
  29. F. Ahmed, U. Ali, D. Sarkar, E. Marzbanrad, K. Choi, Y. Mahmoodkhani, E. Toyserkani
    Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel
    Journal of Materials Processing Technology, 2020
  30. M. Salarian, H. Asgari, M. Vlasea
    Pore space characteristics and corresponding effect on tensile properties of Inconel 625 fabricated via laser powder bed fusion
    Materials Science and Engineering:A, 2020
  31. E. Aghili, M. Shamanian, R. Najafabadi, A. Keshavarzkermani, R. Esmaeilizadeh, U. Ali, E. Marzbanrad, E. Toyserkani
    Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrate
    Ceramics International, 2020
  32. F. Liravi, M. Salarian, C. Castel, L. Simon, E. Toyserkani
    High-speed Material Jetting Additive Manufacturing of Silicone Structures: Mechanical Characterization
    Progress in Additive Manufacturing, 2019
  33. R. Esmaeilizadeh, A. Keshavarzkermani, U. Ali, Y. Mahmoodkhani, B. Behravesh, H. Jahed, A. Bonakdar, E. Toyserkani
    Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed
    Journal of Alloys and Compounds, 2020
  34. F. Ahmed, V. Ahsani, K. Nazeri, E. Marzbanrad, C. Bradley, E. Toyserkani, M. Jun
    Monitoring of Carbon Dioxide Using Hollow-Core Photonic Crystal Fiber Mach–Zehnder Interferometer
    Sensors, 2019
  35. Y. Huang, M. Ansari, H. Asgari, M. Farshidianfar, D. Sarkar, M. Khamesee, E. Toyserkani
    Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing)
    Journal of Materials Processing Technology, 2019
  36. E. Jabari, F. Ahmed, F. Liravi, E. Secor, L. , E. Toyserkani
    Two-dimensional printing of graphene: a review
    2D Materials, 2019
  37. S. Bakhshivash, H. Asgari, P. Russo, F. Dibia, M. Ansari, A. Gerlich, E. Toyserkani
    Printability and microstructural evolution of Ti-5553 alloy fabricated by modulated laser powder bed fusion
    The International Journal of Advanced Manufacturing Technology, 2019
  38. F. Ahmed, A. Azhari, E. Marzbanrad, F. Liravi, U. Ali, M. Pope, E. Toyserkani
    Graphene oxide humidity sensor built entirely by additive manufacturing approaches
    Journal of Materials Science: Materials in Electronics, 2019
  39. U. Ali, R. Esmaeilizadeh, F. Ahmed, D. Sarker, W. Muhammad, A. Keshavarzkermani, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani
    Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4?PH stainless steel laser powder-bed fusion parts
    Materials Science and Engineering: A, 2019
  40. P. Enrique, E. Marzbanrad, Y. Mahmoodkhani, E. Toyserkani, N. Zhou
    Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition
    Surface and Coatings Technology, 2019
  41. Y. Feng, E. Toyserkani, Z. Zhang, Z. Zhang
    Temperature Sensing of Stepped-Metal Coated Optical Fiber Bragg Grating with the Restructured Dual-Peak Resonance
    Applied Sciences, 2019
  42. H. Asgari, M. Salarian, H. Ma, A. Olubamiji, M. Vlasea
    On thermal expansion behavior of invar alloy fabricated by modulated laser powder bed fusion
    Materials & Design, 2018
  43. F. Ahmed, V. Ahsani, S. Jo, C. Bradley, E. Toyserkani, M. Jun
    Measurement of In-fiber Refractive Index Change Using a Mach-Zehnder Interferometer
    IEEE Photonics Technology Letters, 2018
  44. M. Ansari, A. Mohamadizadeh, Y. Huang, V. Paserin, E. Toyserkani
    Laser directed energy deposition of water-atomized iron powder: Process optimization and microstructure of single-tracks
    Optics & Laser Technology, 2018
  45. R. Esmaeilizadeh, U. Ali, A. Keshavarzkermani, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani
    On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
    Journal of Manufacturing Processes, 2018
  46. I. Rishmawi, M. Salarian, M. Vlasea
    Tailoring Green and Sintered Density of Pure Iron Parts using Binder Jetting Additive Manufacturing
    Additive Manufacturing, 2018
  47. F. Liravi, E. Toyserkani
    Additive manufacturing of silicone structures: A review and prospective
    Additive Manufacturing, 2018
  48. E. Wheat, M. Vlasea, J. Hinebaugh, C. Metcalfe
    Sinter structure analysis of titanium structures fabricated via binder jetting additive manufacturing
    Materials & Design, 2018
  49. Y. Huang, M. Khamesee, E. Toyserkani
    A new physics-based model for laser directed energy deposition (powder-fed additive manufacturing): From single-track to multi-track and multi-layer
    Optics & Laser Technology, 2018
  50. P. Enrique, Y. Mahmoodkhani, E. Marzbanrad, E. Toyserkani, N. Zhou
    In Situ Formation of Metal Matrix Composites using Binder Jet Additive Manufacturing (3D Printing)
    Materials Letters, 2018
  51. Z. Jiao, S. Peterkin, L. Felix, R. Liang, J. Oliveira, N. Schell, N. Scotchmer, E. Toyserkani, Y. Zhou
    Surface Modification of 304 Stainless Steel by Electro-Spark Deposition
    Journal of Materials Engineering and Performance, 2018
  52. Y. Mahmoodkhani, U. Ali, S. Shahabad, A. Kasinathan, R. Esmaeilizadeh, A. keshavarzkermani, E. Marzbanrad, E. Toyserkani
    On the measurement of effective powder layer thickness in laser powder-bed fusion additive manufacturing of metals
    Progress in Additive Manufacturing, 2018
  53. Z. Zhang, Y. Huang, A. Kasinathan, S. Shahabad, U. Ali, Y. Mahmoodkhani, E. Toyserkani
    3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity
    Optics and Laser Technology, 2018
  54. M. Salarian, E. Toyserkani
    The use of nano-computed tomography (nano-CT) in non-destructive testing of metallic parts made by laser powder-bed fusion additive manufacturing
    The International Journal of Advanced Manufacturing Technology, 2018
  55. O. Jay, E. Toyserkani, P. Donnadieu, J. Blandin, S. Esmaeili
    Selective laser-assisted deposition of silver nanoparticles on a Mg-2wt.%Ca substrate
    Journal of Physics D: Applied Physics, 2018
  56. U. Ali, Y. Mahmoodkhani, S. Shahabad, R. Esmaeilizadeh, F. Liravi, E. Sheydaeian, Y. Huang, E. Marzbanrad, M. Vlasea, E. Toyserkani
    On the measurement of relative powder-bed compaction density in powder-bed additive manufacturing processes
    AI55+AI49:AI88+AI49:AI49:AI114, 2018
  57. P. Enrique, Z. Jiao, N. Zhou, E. Toyserkani
    Effect of Microstructure on Tensile Properties of Electrospark Deposition Repaired Ni-superalloy
    Materials Science and Engineering: A, 2018
  58. P. Enrique, Z. Jiao, N. Zhou, E. Toyserkani
    Dendritic Coarsening Model for Rapid Solidification of Ni-superalloy via Electrospark Deposition
    Journal of Materials Processing Technology, 2018
  59. E. Sheydaeian, E. Toyserkani
    Additive manufacturing functionally graded titanium structures with selective closed cell layout and controlled morphology
    The International Journal of Advanced Manufacturing Technology, 2018
  60. F. Liravi, M. Vlasea
    Powder bed binder jetting additive manufacturing of silicone structures
    Additive Manufacturing, 2018
  61. H. Fayazfar, M. Salarian, A. Rogalsky, D. Sarkar, P. Russo, V. Paserin, E. Toyserkani
    A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
    Materials & Design, 2018
  62. E. Sheydaeian, E. Toyserkani
    A new approach for fabrication of titanium-titanium boride periodic composite via additive manufacturing and pressure-less sintering
    Composites Part B: Engineering, 2018
  63. K. Karimi, E. Jabari, E. Toyserkani, P. Lee-Sullivan
    Highly conductive graphene paper for flexible electronics applications
    Journal of Materials Science: Materials in Electronics, 2017
  64. B. Marzbanrad, H. Jahed, E. Toyserkani
    On the evolution of substrate’s residual stress during cold spray process: A parametric study
    Materials and Design, 2017
  65. F. Liravi, E. Toyserkani
    A hybrid Additive Manufacturing Method for the Fabrication of Silicone Bio-structures: 3D Printing Optimization and Surface Characterization
    Materials and Design, 2017
  66. E. Sheydaeian, K. Sarikhani, P. Chen, E. Toyserkani
    Material process development for the fabrication of heterogeneous titanium structures with selective pore morphology by hybrid additive manufacturing
    Materials and Design, 2017
  67. E. Sheydaeian, Z. Fishman, M. Vlasea, E. Toyserkani
    On the effect of throughout layer thickness variation on properties of additively manufactured cellular titanium structures
    Additive Manufacturing, 2017
  68. A. Azhari, E. Marzbanrad, D. Yilman, E. Toyserkani, M. Pope
    Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
    Carbon, 2017
  69. J. Iu, E. Massicotte, S. Li, M. Hurtig, E. Toyserkani, J. Santerre, R. Kandel
    In Vitro Generated Intervertebral Discs: Towards Engineering Tissue Integration
    Tissue Engineering, 2017
  70. E. Sheydaeian, E. Toyserkani
    A system for selectively encapsulating porogens inside the layers during additive manufacturing: from conceptual design to the first prototype
    Journal of Manufacturing Processes, 2017
  71. F. Liravi, R. Darleux, E. Toyserkani
    Additive Manufacturing of 3D Structures with Non-Newtonian Highly Viscous Fluids: Finite Element Modeling and Experimental Validation
    Additive Manufacturing, 2017
  72. A. Basalah, S. Esmaeili, E. Toyserkani
    On the influence of sintering protocols and layer thickness on the physical and mechanical properties of additive manufactured titanium porous bio-structures
    Journal of Materials Processing Technology, 2016
  73. Y. Huang, M. Khamesee, E. Toyserkani
    A comprehensive analytical model for laser powder-fed additive manufacturing
    Additive Manufacturing, 2016
  74. B. Marzban, E. Toyserkani, H. Jahed
    Cyclic hysteresis of AZ31B extrusion under load-control tests using embedded sensor technology
    Journal of Fatigue and Fracture of Engineering Materials and Structures, 2016
  75. P. Russo, R. Liang, E. Jabari, E. Marzabrand, E. Toyserkani, Y. Zhou
    Single-step synthesis of graphene quantum dots by femtosecond laser ablation of graphene oxide dispersions
    Nanoscale, 2016
  76. E. Jabari, E. Toyserkani
    Aerosol-Jet Printing of Highly Flexible and Conductive Graphene/Silver Patterns
    Materials Letters, 2016
  77. E. Sheydaeian, M. Vlasea, A. Woo, R. Pilliar, E. Hu, E. Toyserkani
    Effect of glycerol concentrations on the mechanical properties of additive manufactured porous calcium polyphosphate structures for bone substitute applications
    Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2016
  78. B. Marzbanrad, H. Jahed, E. Toyserkani
    On the sensitivity and repeatability of fiber Bragg grating sensors used in strain and material degradation measurement of Magnesium alloys under cyclic loads
    The International Journal of Advanced Manufacturing, 2016
  79. F. Liravi, R. Darleux, E. Toyserkani
    Nozzle Dispensing Additive Manufacturing of Siloxane:  Dimensional Control
    International Journal of Rapid Manufacturing, 2015
  80. A. Basalah, S. Esmaeili, E. Toyserkani
    A novel additive manufacturing-based technique for developing bio-structures with conformal and encapsulated channels
    Biomedical Physics & Engineering Express: A Journal of Institute Physics, 2015
  81. A. Basalah, S. Esmaeili, E. Toyserkani
    Mechanical properties of additive manufactured porous titanium bio-structures with oriented macro-scale channels
    International Journal of Advanced Manufacturing Technology, 2015
  82. E. Jabari, E. Toyserkani
    Laser heat treatment of aerosol-jet additive manufactured graphene patterns
    Journal of Physics D: Applied Physics, 2015
  83. E. Jabari, E. Toyserkani
    Micro-scale aerosol-jet printing of graphene interconnects
    Carbon, 2015
  84. M. Vlasea, R. Pilliar, E. Toyserkani
    Control of structural and mechanical properties in bioceramic Bone substitutes via additive manufacturing layer stacking orientation
    Additive Manufacturing, 2015
  85. M. Vlasea, R. Pilliar, E. Toyserkani
    Effect of greyscale binder levels on additive manufacturing of porous scaffolds with heterogeneous properties
    Journal of Applied Ceramic Technology, 2015
  86. A. Azhari, C. Villain, E. Toyserkani
    Additive manufacturing of graphene–hydroxyapatite nanocomposite structures
    Journal of Applied Ceramic Technology, 2015
  87. A. Azhari, R. Liang, E. Toyserkani
    A novel fiber Bragg grating sensor packaging design for ultra-high temperature sensing in harsh environments
    Measurement Science and Technology, 2014
  88. E. Jabari, S. Tong, A. Azhari, E. Toyserkani
    Non-planar interconnects in double-sided flexible Cu-PET substrates using a laser-assisted maskless microdeposition process: 3D finite element modeling and experimental analysis
    Journal of Optics and Lasers in Engineering, 2014
  89. Y. Hu, Y. Shanjani, E. Toyserkani, M. Grynpas, R. Wang, R. Pilliar
    Porous calcium polyphosphate bone substitutes: Additive manufacturing versus conventional gravity sinter processing – Effect on structure and mechanical properties
    Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2014
  90. M. Vlasea, E. Toyserkani
    Experimental characterization and numerical modeling of a micro-syringe deposition system for dispensing sacrificial photopolymers on particulate ceramic substrates
    Journal of Materials Processing Technology, 2013
  91. M. Vlasea, Y. Shanjani, A. Bothe, R. Kandel, E. Toyserkani
    A combined additive manufacturing and micro-syringe deposition technique for realization of bio-ceramic structures with micro-scale channels
    International Journal of Advanced Manufacturing Technology, 2013
  92. Y. Shanjani, Y. Hu, E. Toyserkani, M. Grynpas, R. Kandel, M. Pilliar
    Solid Freeform Fabrication of porous calcium polyphosphate structures for bone substitute applications: In vivo studies
    Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2013
  93. X. Zhang, H. Alemohammad, E. Toyserkani
    Sensitivity alteration of fiber Bragg grating sensors with additive micro-scale bi-material coatings
    Measurement Science and Technology, 2013
  94. N. Rasti, E. Toyserkani, F. Ismail
    Formation of pseudo-periodic microstructure on titanium surfaces under pulsed nanosecond fiber laser irradiation: Topographical and mechanical properties
    Lasers in Engineering, 2014
  95. H. Alemohammad, E. Foroozmehr, B. Cotten, E. Toyserkani
    A dual-parameter optical fiber sensor for concurrent strain and temperature measurement: design, fabrication, packaging and calibration
    IEEE/OSA Journal of Lightwave Technology, 2013
  96. A. Basalah, Y. Shanjani, S. Esmaeili, E. Toyserkani
    Characterizations of additive manufactured porous titanium implants
    Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2012
  97. E. Foroozmehr, H. Alemohammad, X. Wang, E. Toyserkani, S. Esmaeili
    Laser assisted surface patterning of Magnesium with Silver nanoparticles: Synthesis, Characterization and Modeling
    Journal of Physics D: Applied Physics, 2011
  98. H. Alemohammad, E. Toyserkani
    Metal embedded optical fiber sensors: Laser-based layered manufacturing procedures
    Journal of Manufacturing Science and Engineering, 2011
  99. Y. Shanjani, Y. Hu, R. Pilliar, E. Toyserkani
    Mechanical characteristics of solid-freeform-fabricated porous calcium polyphosphate structures with oriented stacked-layers
    Acta Biomaterialia, 2011
  100. M. Vlasea, Y. Shanjani, A. Basalah, E. Toyserkani
    Additive manufacturing of scaffolds for tissue engineering of bone and cartilage: Review
    Accepted for publication in the International Journal of Advanced Manufacturing Systems, 2011
  101. N. Rasti, E. Toyserkani, F. Ismail
    Chemical modification of titanium immersed in hydrogen peroxide using nanosecond pulsed fiber laser irradiation
    Materials Letters, 2011
  102. M. Alimardani, V. Fallah, A. Khajepour, E. Toyserkani
    The effect of localized dynamic surface preheating in laser cladding of Stellite 1
    Surface & Coatings Technology, 2010
  103. Y. Shanjani, J. Croos, R. Pilliar, R. Kandel, E. Toyserkani
    Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes
    Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2010
  104. H. Alemohammad, E. Toyserkani
    Simultaneous Measurement of Temperature and Tensile Loading using Tunable Superstructure FBGs Developed by Laser-Direct Writing of Periodic On-Fiber Metallic Films
    Journal of Smart Materials and Structures, 2009
  105. M. Alimardani, E. Toyserkani, J. Huissoon, P. Paul
    On the Delamination and Crack Formation in a Thin wall Fabricated using Laser Solid Freeform Fabrication Process: An Experimental-Numerical Investigation
    Journal of Optics and Lasers in Engineering, 2009
  106. J. Loveless, H. Alemohammad, J. Li, V. Gertsman, D. Emadi, E. Toyserkani, S. Esmaeili
    Laser-Assisted Maskless Microdeposition of Silver Nanoparticles on a Magnesium Substrate
    Materials Letters, 2009
  107. Y. Shanjani, E. Toyserkani
    Selective Laser Sintering of Calcium Polyphosphate: Finite Element Modeling and Experiments
    Journal of Laser Micro/Nano-Engineering, 2009
  108. H. Alemohammad, E. Toyserkani
    Modification of the Optical Performance of Fiber Bragg Gratings Using Femtosecond Laser Micromachining
    Journal of Laser Micro/Nano-Engineering, 2009
  109. H. Alemohammad, E. Toyserkani, A. Pinkerton
    Femtosecond laser micromachining of fiber Bragg gratings for simultaneous measurement of temperature and concentration of liquids
    Journal of Physics D: Applied Physics, 2008
  110. H. Alemohammad, O. Aminfar, E. Toyserkani
    Morphology and microstructure of nano-silver thin-films deposited by laser-assisted maskless microdeposition
    Journal of Micromechanics and Microengineering, 2008
  111. M. Alhammed, S. Esmaeili, E. Toyserkani
    Surface modification of Ti-6Al-4V alloy using laser-assisted deposition of a Ti-Si compound
    Journal of Surface and Coating Technology, 2008
  112. A. Fathi, A. Khajepour, M. Durali, E. Toyserkani
    Geometry control of the deposited layer in a non-planar laser cladding process using a variable structure controller
    ASME Journal of Manufacturing Science and Engineering, 2008
  113. M. Alimardani, C. Paul, E. Toyserkani
    On the microstructure of a thin wall formed under thermal and stress fields induced in laser solid freeform fabrication process
    International Journal of Microstructure and Materials Properties (IJMMP), 2010
  114. M. Alimardani, E. Toyserkani, J. Huissoon
    A 3D Dynamic Numerical Approach for Temperature and Thermal Stress Distributions in Multilayer Laser Solid Freeform Fabrication Process
    Journal of Optics and Lasers in Engineering, 2007
  115. H. Alemohammad, E. Toyserkani, C. Paul
    Fabrication of Smart Cutting Tools with Embedded Optical Fiber Sensors Using Combined Laser Solid Freeform Fabrication and Moulding Techniques
    Journal of Optics and Lasers in Engineering, 2007
  116. M. Alimardani, E. Toyserkani
    Prediction of laser solid freeform fabrication using a neuro-fuzzy approach
    Journal of Applied Soft Computing, 2008
  117. M. Iravani, E. Toyserkani
    An image-based feature tracking algorithm for real-time measurement of clad height
    Journal of Machine Vision and Applications, 2007
  118. P. Christ, H. Alemohammad, E. Toyserkani, A. Khajepour, S. Corbin
    Cladding of WC-Co on low carbon steel using a pulsed Nd:YAG laser
    Journal of Materials, 2007
  119. H. Alemohammad, S. Esmaeili, E. Toyserkani
    Deposition of Co-Ti alloy on mild steel substrate using laser cladding
    Journal of Materials, 2007
  120. M. Alimardani, E. Toyserkani, J. Huissoon
    A 3D numerical approach for geometrical prediction of multilayer laser solid freeform fabrication process
    Journal of Laser Applications, 2007
  121. M. Durali, A. Fathi, A. Khajepour, E. Toyserkani
    Adaptive modeling of laser powder deposition process for control and monitoring application
    Journal of Vibration and Control, 2007
  122. A. Fathi, A. Khajepour, E. Toyserkani, M. Durali
    Clad height control in laser solid freeform fabrication using a feedforward-PID controller
    International Journal of Advanced Manufacturing Technology, 2006
  123. A. Fathi, E. Toyserkani, A. Khajepour, M. Durali
    Prediction of melt pool depth and dilution in laser powder deposition
    Journal of Physics D: Applied Physics, 2006
  124. E. Toyserkani, A. Khajepour
    A mechatronics approach to laser powder deposition process
    Journal of Mechatronics, 2006
  125. E. Toyserkani, . Amir  Khajepour, S. Corbin
    3-D finite element modeling of laser cladding by powder deposition: Effects of laser pulse shaping on the process
    Journal of Optics and Lasers in Engineering, 2004
  126. E. Toyserkani, . Amir  Khajepour, S. Corbin
    3-D finite element modeling of laser cladding by powder deposition: Effects of powder feedrate and travel speed on the process
    Journal of Laser Applications, 2003
  127. S. Corbin, E. Toyserkani, A. Khajepour
    Experimental analysis of cladding of Fe-Al coating on the mild steel using automated laser assisted powder deposition
    Journal of Materials Science and Engineering: A, 2003
  128. E. Toyserkani, A. Khajepour, S. Corbin
    Application of experimental-based modeling to laser cladding
    Journal of Laser Applications, 2002